Installing A Processor And Heat Sink Module - Dell EMC PowerEdge C6420 Installation And Service Manual

Figure 30. Removing the processor and heat sink module
Next step
1 Install the processor and heat sink

Installing a processor and heat sink module

Prerequisites
CAUTION: Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1 Follow the safety guidelines listed in
2 If installed, remove the CPU dust cover.
Steps
1 Align the pin 1 indicator of the heat sink to the system board and then place the processor and heat sink module (PHM) on the
processor socket.
84 Installing and removing enclosure components
module.
Safety instructions..