Infors HT Multifors 2 Operating Manual page 45

28 March 2018
The entire instrumentation and control equipment is integrated into
the housing of the basic unit.
At the top left and top right of the basic unit there are measuring
amplifiers with an integrated temperature sensor (Pt100) and con-
necting cables for the pH, pO
The sensor cables (not visible in the illustration above) are ar-
ranged in the following order, starting on the left:
pH

antifoam

temperature (Pt100)

pO

2
The standard configuration of the basic unit includes two thermal
blocks for equilibrating the culture vessels as well as 6 digital and 2
analogue pumps for adding reagents.
Multifors 2 - Parallel Bench-top Bioreactor
Setup and Function
and antifoam sensors.
2
Page 45 of 211