Returning For Repair - Infors HT Multifors 2 Operating Manual

Multifors 2 - Parallel Bench-top Bioreactor
Interferences

10.7 Returning for Repair

Page 208 of 211
The operator must return the equipment or the faulty component
part(s) to the manufacturer if, after consulting the service depart-
ment of the local dealer or the manufacturer, on-site diagnosis
and/or repair is not possible.
The following must be observed if this is the case:
The equipment or the component part which is to be repaired

must be entirely decontaminated before sending to the manu-
facturer.
The operator is obliged to firstly fill in and sign a decontamina-

tion agreement and decontamination form and either send it
together with the written request for the repair work to the li-
censed dealer before returning the faulty equipment to the
manufacturer or, at the latest, together with the faulty equip-
ment on return to the manufacturer.
These forms can be obtained from the licensed dealer or the

manufacturer, contact details can be found on page 2 of this
manual.
28 March 2018