Switching On The Equipment - Infors HT Multifors 2 Operating Manual

8.2.1 Switching on the Equipment

Procedure
28 March 2018
To switch on the equipment, proceed as follows:
1. Switch the equipment on at the main switch.
The operating unit switches on automatically and the system
boots up.
NOTICE!
If several units are being controlled by one
operating unit, each basic unit must be switched on
individually at the main switch.
The touch screen software is described in detail in the separate
operating manual.
Multifors 2 - Parallel Bench-top Bioreactor
Operation
Page 163 of 211