Dot1X Multiple-Hosts - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

dot1x multiple-hosts

This is an obsolete command.
In past releases, the dot1x multiple-hosts interface configuration command was used to allow multiple
hosts (clients) on an IEEE 802.1x-authorized port.
Command History Release
12.1(8)EA1
12.1(14)EA1
Related Commands Command
dot1x host-mode
show dot1x
OL-8566-02
Modification
This command was introduced.
The dot1x multiple-hosts interface configuration command was replaced by
the dot1x host-mode interface configuration command.
Description
Set the IEEE 802.1x host mode on an interface.
Displays IEEE 802.1x statistics, administrative status, and operational status
for the switch or for the specified interface.
Catalyst 3550 Multilayer Switch Command Reference
dot1x multiple-hosts
2-99