Setting Up A Web Server; Configuring The Web Server Function In Easysoft 7 - Eaton easyE4 series Manual

11. Connection to other devices

11.5 Setting up a web server

11.5 Setting up a web server

11.5.1 Configuring the web server function in easySoft 7

560
Only possible with easySoft 7.
The web server function is intended to make it even more convenient for users to use
an easyE4 control relay.
All the easyE4 web server functions can be used through the web.
In other words, this means that the web offers an additional interface for com-
munication, such as an additional HMI for the easyE4 device.
The device status can be ready directly on the display on EASY-E4-...-12...C1 devices –
please refer to → Section "Status display on easyE4 control relays with display and
keypad", page 81.
EASY-E4-...-12...CX1 devices without a display can also be read directly using the web
server function.
The web server needs to be configured in easySoft 7 by opening the Project view and
then going to the Webserver tab – please refer to Webserver tab.
You can configure the web server functions you want for each <program>.e70 file in
easySoft 7.
Select the device you want from the catalog in the Project view
Click on the Webserver tab.
Under the tab, there is a Webserver configuration section that can be used to enable
and configure the web server functionality, as well as an Access control section.
To turn on, enable the checkbox by clicking on it.
To turn off, disable the checkbox by clicking on it.
As soon as you enable the web server function, the Webserver passwords and user
names dialog box will appear. You will need to enter the password for the administrator
in order to show that you are allowed to set up this functionality.
(This administrator password will have previously been defined in the web browser
application.)
You will then be able to create up to two users.
Enter a username into the corresponding text field.
Enter a password into the corresponding text field.
Please note the security requirements for the password:
At least eight ASCII characters with at least one uppercase
character, one lowercase character, one number, and one spe-
cial character.
easyE4 11/18 MN050009 EN www.eaton.com