Communication Protocols; General Scada (Communication) Setting - Eaton EMR-3MP0 Installation, Operation And Maintenance Manual

3 Communication Protocols

3.1 General SCADA (Communication) Setting

3 Communication Protocols
3.1 General SCADA (Communication) Setting
The set of available SCADA protocols depends on the ordered hardware variant (see
"Catalog Codes for the
You have to define which one of the available SCADA protocols the EMR-3MP0 shall use.
This is done by setting [Device Planning] »Protocol« to the required communication
protocol.
After this, you have to make some more settings related to the selected protocol.
110
EMR-3MP0", ╚═▷ "Communication Protocol
www.eaton.com
╚═▷
Codes").
EMR-3MP0