Operation Of The Menu Selection And Value Entry; How To Navigate The Device Menus; Operating Principle In The Circuit Diagram And Function Block Editor - Eaton easyE4 series Manual

4.3 Operation of the menu selection and value entry

4.3.1 How to navigate the device menus

4.3.2 Operating principle in the circuit diagram and function block editor

OK Select; confirm value
ESC Cancel; go back
DEL Delete
ALT Depending on the starting point:
- Toggle display
- Jump to the start or end of the menu
Go left
Go right
Go up; increment value
Go down; decrement value
Button Effect
DEL Delete rung, contact, relay or empty rung in the circuit diagram
ALT Toggle between N/C and N/O contact, connect contacts, relays and rungs,
add rungs
Change value; move cursor up, down
Change position; move cursor left, right
ESC Undo setting from last OK, current display, leave menu
OK Change contact / relay. Insert new; save settings
P1 input when used as P button
P2 input when used as P button
P3 input when used as P button
P4 input when used as P button
easyE4 11/18 MN050009 EN www.eaton.com
4.3 Operation of the menu selection and value entry
4. Operation
93