Eaton easyE4 series Manual page 356

6. Function blocks
6.1 Manufacturer function blocks
352
Parameter set
Subject
Message text
Simulation possible
Other
Retention
The function block does not recognize retentive data.
See also
→ Section "E-mail function", page 562
→ Section "BV - Boolean operation", page 353
→ Section "D - Text display", page 357
→ Section "D - Text display editor", page 366
→ Section "DL - Data logger", page 380
→ Section "JC - Conditional jump", page 386
→ Section "LB - Jump label", page 391
→ Section "MR - Master reset ", page 393
→ Section "NC - Numerical converter", page 397
→ Section "ST - SET cycle time", page 403
easyE4 11/18 MN050009 EN www.eaton.com
Description
contains all the detailed information
required in order to send an e-mail.
1 recipient group; there are no other
options as of this writing
The e-mail's subject
The text must not exceed 160 char-
acters.
Note
figuration. To do this, click on "Pro-
ject" – select a base device – click
on the "E-Mail" tab. You can then
configure the e-mail server and
one or more e-mail recipients for
each of the three available groups.