Card - Device; Device - Card - Eaton easyE4 series Manual

CARD -> DEVICE
If you select this submenu, a list with the names of all the programs stored on the
memory card will appear.
The ✓ checkmark at the end of a line indicates which program is currently set as the
program to be transferred to the device. Meanwhile, the program that is currently selec-
ted will flash.
Select the program that you want to transfer to the device.
Confirm your selection by clicking the OK button.
DEVICE -> CARD
The current program will be transferred from the device to the memory card.
After you select this submenu, another menu will be offered for selection.
SAVE PROG.
Overwrites the selected program with the program from the
easyE4
SAVE AS
Makes it possible to save the current program on the easyE4
under a new name
See also
→ Section "microSD memory card", page 487
→ Section "Transferring programs from and to a memory card", page 150
easyE4 11/18 MN050009 EN www.eaton.com
5.5 Transferring programs from and to a memory card
5. Programming on the device
153