Eaton easyE4 series Manual page 225

Assigning operands
SN - Output bit via NET (send)
N - Network marker bit
nN - NET station n marker
LE - Output backlight
Q - Bit output from another FB
Parameter set
Parameter set
Function block release by
EN is necessary
Parameter display
+ Call enabled
Simulation possible
easyE4 11/18 MN050009 EN www.eaton.com
6.1 Manufacturer function blocks
Bit outputs
x
x
x
x
x
Description
If this checkbox is enabled, the state
of function block input EN will be
evaluated. If the checkbox is dis-
abled instead, the function block will
be enabled and function block input
EN will not do anything.
Function block parameters and con-
stants can be edited on the device.
6. Function blocks
Note
This parameter ensures that
when existing programs are
copied, the functionality of the
function blocks that are carried
over will be retained. The para-
meter will be automatically set
to 0 or 1 depending on the func-
tion block.
221