Programs Submenu; Start Program - Eaton easyE4 series Manual

5. Programming on the device
5.5 Transferring programs from and to a memory card

5.5.1.1 PROGRAMS submenu

152
You can use this submenu to manage the programs on the easyE4.
The program transfer menu offers the following options:
Table 59: Cards\Program
SET BOOT PROG.
DELETE PROGRAM
CARD -> DEVICE
DEVICE -> CARD

START PROGRAM

If you select this submenu, a list with the names of all the programs stored on the
memory card will appear.
Table 60: Card\Pro-
gram\Set boot program
Name Program 1 ✓
Name Program 2
Name Program 3
...
The checkmark ✓ at the end of a line is used to indicate the program with which the
easyE4 device will start as soon as there is a supply voltage.
If the display is empty, this means that no programs have been
stored on the memory card.
Select the starting program you want.
DELETE PROGRAM
If you select this submenu, a list with the names of all the programs stored on the
memory card will appear.
The ✓ checkmark at the end of a line indicates which program is currently set as the
starting program. Meanwhile, the program that is currently selected will flash.
Select the program that you want to delete.
A confirmation prompt will appear. The program will not be deleted until you select Yes
and press OK as a confirmation.
easyE4 11/18 MN050009 EN www.eaton.com