Programming Software Easysoft - Eaton easyE4 series Manual

1. easyE4 control relays description

1.9 Programming software easySoft 7

1.9 Programming software easySoft 7
28
easyE4 control relays are designed to be programmed with the easySoft 7 pro-
gramming software program. This program was developed specifically for this series
of devices, and makes it possible to quickly, conveniently, and easily integrate available
functions into a circuit diagram and use the result as a control program.
The program is available free of charge. However, you will need a software license in
order to be able to use all of its functions.
easySoft 7 can also be used to:
Test your circuit diagram by simulating the power flow (offline test).
l
Transfer your circuit diagram to a connected and operational easyE4 base device.
l
Monitor the power flow and view operand states after transferring the circuit dia-
l
gram (online test)
Print out your circuit diagram so that you can document it in detail
l
In addition, the program makes it possible for you to use a password to protect your pro-
jects and, accordingly, your know-how.
easyE4 11/18 MN050009 EN www.eaton.com