Signal Diagram High-Speed Counter - Eaton easyE4 series Manual

6. Function blocks
6.1 Manufacturer function blocks
234
Parameter set
Parameter set
Function block release by
EN is necessary
Parameter display
+ Call enabled
Simulation possible
Other
Signal diagram
Figure 133: Signal diagram High-speed counter
Legend for Figure
easyE4 11/18 MN050009 EN www.eaton.com
Description
If this checkbox is enabled, the state
of function block input EN will be
evaluated. If the checkbox is dis-
abled instead, the function block will
be enabled and function block input
EN will not do anything.
Function block parameters and con-
stants can be edited on the device.
Note
This parameter ensures that
when existing programs are
copied, the functionality of the
function blocks that are carried
over will be retained. The para-
meter will be automatically set
to 0 or 1 depending on the func-
tion block.