Eaton easyE4 series Manual page 280

6. Function blocks
6.1 Manufacturer function blocks
276
Operating mode
Description
Mode parameter
UNP The manipulated variable is output as a
unipolar 12-bit value. .
BIP The manipulated variable is output as a
bipolar 13-bit value.
Function block outputs
Description
(Bit)
LI 1: if the value range of the medium-voltage is
exceeded.
(DWord)
QV Manipulated variable
QP Proportional component of the manipulated vari-
able
Can be used for diagnostic purposes
QI Integral component of the manipulated variable
Can be used for diagnostic purposes
QD Differential component of the manipulated vari-
able
Can be used for diagnostic purposes
Assigning operands
You can assign the following operands to the function block outputs that are numeric
outputs:
Assigning operands
Constant
Markers: MB, MD, MW
Analog inputs IA
Analog output QA
Numeric output from another QV FB
You can assign the following operands to the function block outputs that are bit outputs:
Assigning operands
Constant 0, constant 1
M – Markers
SN - Output bit via NET (send)
N - Network marker bit
nN - NET station n marker
LE - Output backlight
Q - Bit output from another FB
easyE4 11/18 MN050009 EN www.eaton.com
Note
Value range: 0 ... 4095
Value range: -4096 ... +4095
Note
Integer value range
for operating mode UNP: 0...+4095 (12 Bit)
for operating mode BIP: -4096...+4095 (13
Bit)
Outputs
x
x
x
x
x
Bit outputs
x
x
x
x
x
x
x