Harmonics Group - YOKOGAWA WT200 User Manual

14.3 Commands

14.3.6 HARMonics Group

The commands in the HARMonics group relate to the harmonic analysis function. This allow you to make the same
settings and inquiries as when using the HARMONICS key on the front panel and the corresponding menus. This
group is only useful in case your instrument is equipped with the /HRM option.
:HARMonics :
HARMonics?
Function Queries all settings relating to harmonic
analysis.
Syntax HARMonics?
Example HARMONICS?→:HARMONICS:STATE 0;
ELEMENT 1;SYNCHRONIZE V,1;THD IEC;
DISPLAY:ORDER 1
HARMonics:DISPlay?
Function Queries all settings concerning the display in
case of harmonic analysis.
Syntax HARMonics:DISPlay?
Example HARMONICS:DISPLAY?
HARMONICS:DISPLAY?→:HARMONICS:
DISPLAY:ORDER 1
HARMonics:DISPlay:ORDer
Function Sets the order of the harmonic component to be
shown on display B, queries the current setting.
Syntax HARMonics:DISPlay:ORDer {<NRf>}
HARMonics:DISPlay:ORDer?
{<NRf>}=1 to 50
Example HARMONICS:DISPLAY:ORDER 1
HARMONICS:DISPLAY:ORDER?→:HARMONICS:
DISPLAY:ORDER 1
14-22
;
STAT e <Space>
ELEMent <Space>
SYNChroniz e <Space>
THD <Space>
DISPlay :
OFF
ON
<NRf>
?
<NRf>
?
V ,
A
?
IEC
CSA
?
;
ORDer <Space>
HARMonics:ELEMent
Function Sets the element for harmonic analysis/queries
the current setting.
Syntax HARMonics:ELEMent {<NRf>}
HARMonics:ELEMent?
{<NRf>}= 1
Example HARMONICS:ELEMENT 1
HARMONICS:ELEMENT?→:HARMONICS:ELEMENT 1
HARMonics[:STATe]
Function Sets the harmonic analysis mode ON/OFF,
queries the current setting.
Syntax HARMonics[:STATe] {<Boolean>}
HARMonics[:STATe]?
Example HARMONICS:STATE ON
HARMONICS:STATE?→:HARMONICS:STATE 1
HARMonics:SYNChronize
Function Sets the fundamental frequency for PLL
synchronization (PLL source)/queries the
current setting.
Syntax HARMonics:SYNChronize
{(V|A),(<NRf>|ELEMent<1>)}
HARMonics:SYNChronize?
Example HARMONICS:SYNCHRONIZE V,1
HARMONICS:SYNCHRONIZE?→:HARMONICS:
SYNCHRONIZE V,1
<NRf>
ELEMent <x>
<NRf>
?
?
?
IM 253421-01E