YOKOGAWA WT200 User Manual page 85

8.1 Storing/Recalling Measured Data
8-4
Recalling ON/OFF
After having set the recalling interval, select the recall menu once again. The initial
value is oFF.
• on: Recalling will start by pressing the ENTER key after selecting "on"; the
RECALL indicator will light while recalling is in progress.
• oFF: Recalling will stop by pressing the ENTER key after selecting "oFF"; the
RECALL indicator will extinguish
Note
• During recalling, the measurement conditions and range
being recalled. After recalling finishes, the original measurement conditions will return.
* Measurement range, measurement mode, filter ON/OFF, scaling ON/OFF, scaling
constants, averaging ON/OFF, averaging mode, averaging constants, integration mode,
integration type, integration time, harmonic analysis function ON/OFF, PLL source,
computation method of harmonic distortion factor, etc.
• When recalling data to a personal computer by communication interface, data might be cut
due to the data length or used personal computer. In such a case, increase the recalling
interval.
*
will become as those of the data
IM 253421-01E