YOKOGAWA WT200 User Manual page 99

9.6 Setting the Comparator Limit Values (optional)
• Setting the Comparator Limit Values in case of Harmonic Anaiysis
1.
SETUP
OUTPUT
SHIFT
Relay setting
(Display C)
6.,18.
9-12
Select the comparator function
(Display C)
2.
Set limit item
7.
(Display A)
ENTER
8.
A B
8.
Sets the A column
9.
Moves to the B column
SHIFT
10.
Select from 1 to 3
19.
ENTER
End
3. (Display C)
ENTER
4.
Set limit value
11.
(Display B)
ENTER
12.
Up/down
13.
SHIFT
14.
SHIFT •
*1 When you press the
channel displayed on display C changes to the next
channel (from ch1 to ch2, for example).
*2 Because the maximum order of harmonic analysis varies
depending on the fundamental frequency, the analysis
data may not be available up to 50th order (bar display)
in some cases. In this case, comparison will not be
performed even if the limit value is specified.
*3 The first digit of the limit value is used to display the sign.
Select "–" to set a negative limit value. Select no sign to
set a positive value.
*2
5.
ENTER
*3
Set exponent
15.
(Display C)
ENTER
16.
Shift cursor
Shift decimal
point
key in step 17, the output
ENTER
*1
17.
ENTER
IM 253421-01E