YOKOGAWA WT200 User Manual page 173

Command
HARMonics Group
:HARMonics?
:HARMonics:DISPlay?
:HARMonics:DISPlay:ORDer
:HARMonics:ELEMent
:HARMonics[:STATe]
:HARMonics:SYNChronize
:HARMonics:THD
INTEGrate Group
:INTEGrate?
:INTEGrate:MODE
:INTEGrate:RESet
:INTEGrate:STARt
:INTEGrate:STOP
:INTEGrate:TIMer
:INTEGrate:TYPE
MATH Group
:MATH?
:MATH:ARIThmetic
:MATH:AVERage
:MATH:CFACtor
:MATH:TYPE
MEASure Group
:MEASure?
:MEASure:HARMonics?
:MEASure:HARMonics:ITEM?
:MEASure:HARMonics:ITEM:PRESet
:MEASure:HARMonics:ITEM:{SYNChronize|<harmonic analysis function>}
:MEASure:HARMonics:VALue?
:MEASure:NORMal?
:MEASure[:NORMal]:ITEM?
:MEASure[:NORMal]:ITEM:PRESet
:MEASure[:NORMal]:ITEM:{TIME|MATH}
:MEASure[:NORMal]:ITEM:<normal measurement function>?
:MEASure[:NORMal]:ITEM:<normal measurement function>:ELEMent<x>
:MEASure[:NORMal]:VALue?
IM 253421-01E
Description
Queries all settings related to harmonic analysis.
Queries all settings related to the display in case of harmonic analysis.
Sets/queries the order of the harmonic component to be shown
on display B.
Sets/queries the element for harmonic analysis.
Sets/queries the harmonic analysis mode ON/OFF.
Sets/queries the input to be used as PLL source.
Sets/queries the computation method for harmonic distortion.
Queries all settings related to integration.
Sets/queries the integration mode.
Resets the integration values.
Starts integration.
Stops integration.
Sets/queries the integration timer.
Sets/queries the integration type.
Queries all settings related to the computing function.
Sets/queries the computing equation of the four arithmetic operations.
Sets/queries the average power computation during integration.
Sets/queries the computing equation of the crest factor.
Sets/queries the computing equation.
Queries all settings related to measurement/computation data.
Queries all settings related to harmonic analysis data.
Queries all settings related to the output items of harmonic analysis data.
Sets the ON/OFF pattern for all communication outputs of the harmonic
analysis function.
Sets/queries the communication output item of harmonic analysis ON/OFF. 14-27
Queries harmonic analysis data set by commands other than
" MEASure:HARMonics:ITEM ".
Queries all settings related to normal measured/computed data.
Queries all settings related to the output items of normal
measured/computed data.
Sets the ON/OFF pattern for all communication outputs of the normal
measurement function.
Sets/queries the ON/OFF state of the communication output of
.
{integration time|MATH}
Queries communication output settings of the normal measurement function. 14-27
Turns ON/OFF the communication output of the specified normal
measurement function.
Queries normal measured/computed data set by commands other than
" "
MEASure[:NORMal]:ITEM
14.3 Commands
Page
14-22
14-22
14-22
14-22
14-22
14-22
14-23
14-23
14-23
14-23
14-23
14-23
14-23
14-23
14-24
14-24
14-24
14-24
14-24
14-26
14-26
14-26
14-26
14-27
14-27
14-27
14-27
14
14-27
14-28
14-28
14-11