YOKOGAWA WT200 User Manual page 87

8.2 Storing/Recalling Setting Parameters
Explanation
8-6
Storing Setting Parameters
Stores the current setting parameters which consist of the following. Four
destinations (FiLE1/FilE2/FiLE3/FiLE4) are available.
Measurement range, measurement mode, scaling settings, averaging settings, filter
settings, integration settings, harmonic settings, plotter output settings, store/recall
settings, and communication settings.
When data are saved in a file and you want to save data in the same file, display C
will show "SAVEd". Pressing the ENTER key will result in overwriting the previously
saved data.
Setting parameters are saved in another internal memory than measured data.
Saved setting parameters are backed up by the lithium battery in the same way as
measured data.
Recalling Setting Parameters
When setting parameters are being retrieved, all setting parameters are being set
accordingly. After that, measurements can be carried out.
IM 253421-01E