YOKOGAWA WT200 User Manual page 19

1.3 Digital Numbers/Characters, and Initial Menus
1-6
• Setting the Filter, Averaging, Scaling, Ext. Sensor Input,
and Initializing Setting Parameters
1.
( Display C )
SETUP
2.
• Integration Setting
1.
RESET
2.
SHIFT INTEG SET
• Turning the Harmonic Analysis Function ON/OFF
1.
START
2.
SHIFT HARMONICS
• Storing/Recalling to/from Internal Memory
1.
STOP
2.
SHIFT MEMORY
• Setting Output
1.
SETUP
2.
SHIFT OUTPUT
(Filter setting)
(Averaging setting)
(Scaling setting)
(Ext. sensor input setting)
(Initiallizing set-up parameters)
(Computation, crest factor settings)
(Measurement synchronization source setting)
(MAX hold setting)
(Number of displayed digits)
( Display C )
(Setting integration mod)
(Setting integration timer)
(Setting integration preset time)
(Integration type setting)
(Display C)
(Setting the element)
(Setting PLL source)
(Setting computation methood
of harmonic distortion)
( Display C )
(Storing measurement data)
(Recalling measurement data)
(Storing setting parameters)
(Recalling setting parameters)
( Display C )
(Setting items for communication,
plotter, or printer output)
(Execute plotter or printer output)
(Setting D/A output)
(Comparator setting:relay output setting)
IM 253421-01E