Turning The Power On/Off, Opening Messages - YOKOGAWA WT200 User Manual

3.9

Turning the Power ON/OFF, Opening Messages

Item to be Checked before Turning ON the Power
Location of the Power Switch
Turning the Power ON
Turning the Power OFF
3-12
• Check that the instrument is installed correctly (see section 3.2, "Installing the
Instrument").
• Check that the power cord is connected properly (see section 3.5, "Connecting the
Power Supply").
The power switch is located in the lower left corner of the front panel.
Turning the power ON will result in staring the test program, which checks each memory.
When the results of these checks are all satisfactory, opening, messages will appear as
described on the next page, after which the instrument will be ready for measurement.
When the test program results in displaying error codes, proper operation of the
instrument cannot be performed. Immediately turn OFF the power and contact you
nearest representative.
Addresses may be found on the back cover of this manual. When contacting your
representative, inform him of the name, suffix and No. code as on the right side panel,
and of the displayed error code(s).
Note
• In case of an error code, refer to section 15.4, "Error Codes and Corrective Actions" , for a
description and corrective action.
• A warm-up time of approx.30 minutes is required before all spesifications of the instrument
can be met.
When turning the power OFF, the previous setting parameters will be kept.
Consequently, turning the power ON again will result in the appearance of the setting
condition of the previous measurements.
Note
The instrument uses a lithium battery to back up setting parameter. When the voltage level of
the lithium battery falls below a certain value, an error code (see section 15.4, "Error Codes
and Corrective Actions") appears as the instrument is turned ON. When the battery life is
exhausted, turning ON the power switch will result in an error code and the battery needs to
be replaced. Never replace the battery yourself, but inform your nearest representative.
Addresses may be found on the back cover of this manual.
IM 253421-01E