YOKOGAWA WT200 User Manual page 117

10.4 Output Format
10-8
Default Output Format in case Integration Measurement
Data
Line 1
Terminator
number
Line 2
W1 data Terminator
Line 3
Wh1data Terminator
Line 4 Ah1data
Terminator
Line 5
Frequency ,
Line 6
END Terminator
Note
• When the frequency is set by either of the following methods, only one value is measured,
and that value will be output.
- by panel keys: FUNCTION key on display C.
- by communication command: by the "DC" or "EC" command.
After setting the measurement object of frequency, even changing the display C to something
different than VHz or AHz will not result in changing the object of measurement of frequency.
When selecting the output items yourself and you set a frequency item which is not object of
measurement, "999999.E+03" will be output.
• The displayed values of V (voltage), A (current), W (active power), VA (apparent power), var
(reactive power), Vpk (voltage peak), and Apk (current peak) while the MAX hold function
(see section 4.8) is enabled will be the maximum values (MAX) that are held. The values
output via communications are also set to the maximum values (MAX) that are held.
(The data number will only be output in case of recall)
Elapsed
Terminator
integration time
IM 253421-01E