YOKOGAWA WT200 User Manual page 111

10.1 GP-IB Interface Functions and Specifications
GP-IB Interface Specifications
10-2
• Electrical & mechanical specifications: conforms to IEEE St'd 488-1978
• Functional specifications: see the table below
• Code: ISO (ASCII) code
• Address setting: Address can be set in the range from 0 to 30 using the front panel
keys.
• Remote mode clear: remote mode can be cleared by pressing the LOCAL key on the
front panel. However, this is not possible when Local Lockout has been set by the
controller.
Function
source handshake
acceptor handshake
talker
listener
service request
remote local
parallel poll
device clear
device trigger
controller
The connectors used in this function have protective covers. When the covers are
removed or when using connectors, the voltage ratings across the measuring input
and the ground become as follows:
Voltage across A, ±(V and A side) input terminals and ground 400 Vrms max.
Voltage across V terminal and ground
Put the protective cover on the connector when this function is not used.
Subset name Description
SH1 full source handshake capability
AH1 full acceptor handshake capability
T5 basic talker capability, serial polling, nontalker on
MLA (My Listen Address), talk-only capability
L4 Basic listener capability, nonlistener to MTA (My Talk
Address), no listen-only capability
SR1 full service request capability
RL1 full remote/local capability
PP0 no parallel polling capability
DC1 full device clear capability
DT1 full device trigger capability
C0 no controller function
CAUTION
600 Vrms max.
IM 253421-01E