Turning The Comparator Function On/Off (Optional) - YOKOGAWA WT200 User Manual

9.8 Turning the Comparator Function ON/OFF
(optional)
Keys
Procedure
Explanation
IM 253421-01E
A
SAMPLE
V OVER
A OVER
MODE B
RMS
V MEAN
DC
C
SCALING AVG FILTER STORE
• Operate the instrument by following the thick lines in the menu below.
• Press the ENTER key to confirm a selection or setting.
• To leave the current menu in the middle of the operation, press the key indicated in step 1.
The confirmed settings up to that point are kept.
Select the comparator function
1.
(Display C)
SETUP
2.
SHIFT OUTPUT
Turning the Comparator Function ON/OFF
After having set all the items described on the previous pages, turn the comparator
function ON.
• on: The comparator function will start by pressing the ENTER key after selecting
"on";
• oFF: The comparator function will stop by pressing the ENTER key after selecting
"oFF".
• After having turned ON the comparator function, do not change the comparator
mode. Changing the limit item might result in unexpected statuses of the output
relay.
• Make sure not to greatly vary the input signal before turning the comparator
function ON. Depending on the input signal used for determination, the
instrument may display error codes (i.e. overrange) and this will change the
output relays as described in section 9.4. When using the output relay as a
control signal, make sure to match these control signals with other equipments
to eliminate erroneuous control.
m V VA
AUTO AUTO
FUNCTION
k A var
V RANGE A RANGE
M W
TIME
MODE MAX HOLD
m V PF
FUNCTION
k A
deg
M W
m V Hz
START STOP
FUNCTION
k A h
HARMONICS MEMORY
M W h
REMOTE
LOCAL SETUP
RECALL HARMONICS
INTERFACE OUTPUT
(Display C)
3.
ENTER
4.
CAUTION
Displays
relevant
HOLD keys and
TRIG
indicator
ENTER
CAL
INTEGRATOR
RESET
INTEG SET
SHIFT
5.
ENTER
End
9-17
9