YOKOGAWA WT200 User Manual page 174

14.3 Commands
Command
RECall Group
:RECall?
:RECall:INTerval
:RECall:PANel
:RECall[:STATe]
RELay Group
:RELay?
:RELay:DISPLay
:RELay:HCHannel<x>?
:RELay:HCHannel<x>:FUNCtion
:RELay:HCHannel<x>:THReshold
:RELay:MODE
:RELay:NCHannel<x>?
:RELay:NCHannel<x>:FUNCtion
:RELay:NCHannel<x>:THReshold
:RELay:STATe
SAMPle Group
:SAMPle?
:SAMPle:HOLD
STATus Group
:STATus?
:STATus:CONDition?
:STATus:EESE
:STATus:EESR?
:STATus:ERRor?
:STATus:FILTer<x>
:STATus:QMESsage
:STATus:SPOLl?(Serial Poll)
STORe Group
:STORe?
:STORe:INTerval
:STORe:PANel
:STORe[:STATe]
14-12
Description
Queries all settings related to recalling data.
Sets/queries the recalling interval.
Retrieves the setting parameters file.
Sets/queries recalling ON/OFF.
Queries all settings related to the comparator function.
Sets/queries the comparator display OFF, or in case of ON, the channel to be
displayed.
Queries all settings related to relay output items in case of harmonic
analysis.
Sets/queries function of the relay output item in case of harmonic analysis. 14-34
Sets/queries the threshold level for the relay output item.
Sets/queries the mode of the comparator function.
Queries all settings related to the relay output items in case of normal
measurement.
Sets/queries the function of the relay output in case of normal
measurement.
Sets/queries the threshold level for the relay output item.
Sets/queries the comparator function ON/OFF.
Queries all settings related to sampling.
Sets/queries to hold the output of data (display, communication).
Queries all settings related to the status of communication.
Queries the contents of the condition filter and clears it at the same time.
Sets/queries the extended event register.
Queries the contents of the extended event register and clears it.
Queries the occurred error code and message.
Sets/queries the transit filter.
Sets/queries whether or not to apply the corresponding message to the
query " ".
STATus:ERRor?
Executes serial polling.
Queries all settings related to storing data.
Sets/queries the interval for storing data.
Saves the setting parameters to a file.
Sets/queries the store function ON/OFF.
Page
14-32
14-32
14-32
14-32
14-33
14-33
14-33
14-34
14-34
14-34
14-34
14-34
14-34
14-35
14-35
14-36
14-36
14-36
14-36
14-36
14-37
14-37
14-37
14-37
14-37
14-37
14-37
IM 253421-01E