Adjusting Front Field Lights - MacDon M1170 Operator's Manual

2. Adjust lights by hand as required. Loosen/tighten nuts (A) if
necessary.

Adjusting Front Field Lights

Adjust field lights when in the field (or equivalent) to best suit Operator preference.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
1. Hold onto handholds (A) on the cab front corners, and
stand on header anti-slip strips.
214733
MAINTENANCE AND SERVICING
Figure 5.169: Left Cab-Forward Headlight – Right
Opposite
Figure 5.170: Windrower in Cab-Forward
366
A A
A
Revision A