MacDon M1170 Operator's Manual page 184

17. Remove the header leg pin (B) by removing the hairpin (A)
from header leg on both sides.
18. Lower header stand (D) by pulling spring loaded pin (C).
Release spring pin to lock stand.
19. Windrowers with self-aligning center-link: Release the
center-link latch (A) before returning to the cab.
20. Disengage safety prop by turning lever (A) downwards until
lever locks into the vertical position.
21. Repeat for the opposite side.
CAUTION
Check to be sure all bystanders have cleared the area.
214733
OPERATION
A
B
Figure 4.122: Header Stand
Figure 4.123: Center-Link
Figure 4.124: Disengaging Safety Prop
168
C
D
A
A
Revision A