Installing Engine Primary Air Filter - MacDon M1170 Operator's Manual

Installing Engine Primary Air Filter

NOTE:
For primary air filter replacement part number, refer to
1. Insert new primary filter (A) into canister and push into
place, ensuring that element is firmly seated in canister.
2. Align arrow (A) to UNLOCK position on end cap, and push
end cap fully onto housing.
3. Rotate end cap clockwise until catch (A) engages housing to
prevent end cap from turning.
4. Position end cap (B) onto filter housing with aspirator
pointing approximately down.
5. Secure end cap onto filter housing by closing latch (A).
6. Close the hood. Refer to
7. Close the maintenance platform. Refer to
Platform, page 258.
214733
MAINTENANCE AND SERVICING
5.3.2 Closing Hood, page 257.
5.4.1 Opening
5.1.4 Filter Part Numbers, page
Figure 5.93: Air Filter
Figure 5.94: Air Filter
Figure 5.95: Air Filter
315
251.
A
B
A
A
Revision A