Inspecting And Replacing 125A Main Fuses - MacDon M1170 Operator's Manual

Inspecting and Replacing 125A Main Fuses

The 125A main fuse holders are located on the frame on the left cab-forward side platform beside the battery.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
Access the 125A main fuses as follows:
1. Stop the engine and remove the key.
2. Open the left platform. Refer to
page 258.
3. Remove negative battery terminal.
4. Locate the five main fuses (A) secured to the left
cab-forward front frame.
5. To check condition of the fuse, pull tab (A) and open
cover (B).
214733
MAINTENANCE AND SERVICING
5.4.1 Opening Platform,
386
A A
Figure 5.205: Main Fuses
Figure 5.206: 125A Main Fuse
B
A
Revision A