Adding Engine Oil - MacDon M1170 Operator's Manual

Adding Engine Oil

WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
1. Open the hood. Refer to
2. Clean around filler cap (A) and remove by turning it
counterclockwise.
3. Carefully pour in 14 liters (14.8 qts. U.S.) of new oil. A
funnel is recommended to avoid spillage. Refer to
Lubricants, Fluids, and System Capacities, page 249
specifications.
CAUTION
Do NOT fill above the HIGH mark.
4. Replace oil filler cap (A) and turn it clockwise until snug.
5. Check the oil level. Refer to
page 287.
6. Close the hood. Refer to
214733
MAINTENANCE AND SERVICING
5.3.1 Opening Hood, page
5.1.3
5.7.1 Checking Engine Oil Level,
5.3.2 Closing Hood, page 257.
256.
for oil
Figure 5.52: Oil Filler Cap
288
A
Revision A