MacDon M1170 Operator's Manual page 113

8. Select CALIBRATION WITH HEADER ENGAGED to display the
calibration page as shown at right.
9. Press the PLAY button on the screen to begin the
calibration process.
NOTE:
If the engine speed is less than 1500 rpm when you press
the PLAY button, the calibration system will accelerate the
engine to 1500 rpm.
10. When Stage 1 of the calibration is complete, press the PLAY
button (A) on the screen to continue with Stage 2 of the
calibration process.
11. When Stage 2 of the calibration is complete, press the
RESUME button (A) on the screen to set HEADER FLOAT, or
press the HOME or BACK button (not shown) to exit
without setting the float.
214733
OPERATOR'S STATION
Figure 3.109: Calibration Page
Figure 3.110: Calibration Page
Figure 3.111: Calibration Page
97
1014668
A
A
Revision A