MacDon M1170 Operator's Manual page 236

Hide thumbs Also See for M1170:

Table of Contents

4. Scroll to the knife alarm pressure setting (A), and press

knob to select it.

5. Turn knob to change the ALARM set-point in window (A).

Scrolling past the highest setting turns the alarm off. When

the alarm point is off, the digital value is replaced with

three dashed lines.

6. Adjust knife alarm pressure set-point to desired value, and

press knob to select it. Factory setting is 23,442 kpa

Figure 4.239: Adjusting Knife Alarm Pressure

Troubleshooting