MacDon M1170 Operator's Manual page 112

1. Start the engine, and engage the header.
2. Press soft key 5 (A) to open the main menu.
3. To scroll to the settings icon (C), use the HPT scroll knob (B)
or the ground speed lever (GSL) scroll wheel (not shown).
4. Press the HPT scroll knob (B) or the GSL SELECT button (not
shown) to activate the settings menu options.
5. Scroll to the WINDROWER SETTINGS icon (A) and press
SELECT.
6. Scroll to the CALIBRATION icon (B), and press SELECT to
open the adjustment page.
NOTE:
The F3 shortcut button on the operator's console will also
open the WINDROWER SETTINGS menu.
7. Select POSITION SENSORS (A).
214733
OPERATOR'S STATION
A
Figure 3.106: Opening the Main Menu
A
Figure 3.107: Windrower Settings Icon and Calibration
Submenu Icon
Figure 3.108: Calibration Options
96
B
B
A
C
1019618
Revision A