Replacing The Cabin Dome Bulb - MacDon M1170 Operator's Manual

Replacing the Cabin Dome Bulb

WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator's seat for any reason.
1. Stop the engine and remove the key.
2. Insert a slotted screwdriver (or similar prying tool) into
slot (A). Gently pry the lens cover until retaining tabs (B)
are free of the dome light bezel.
3. Remove lens cover.
4. Replace bulb (A) (MD #208191).
IMPORTANT:
Do NOT touch glass with fingers.
5. Insert single retaining tab (A) into dome light bezel.
6. Insert a slotted screwdriver (or similar prying tool) into
slot (B), and gently pry lens cover until retaining tabs (C)
engage into dome light bezel.
214733
MAINTENANCE AND SERVICING
Figure 5.188: Cabin Dome Light
Figure 5.189: Cabin Dome Light with Cover Removed
Figure 5.190: Cabin Dome Light
375
B
A
A C
A
1015623
B
Revision A