Powering On The At-Sbxpwrsys1 Ac Power Supply; Figure 108: Ac Sockets On The At-Sbx3112 Chassis Rear Panel - Allied Telesis SwitchBlade x3112 Installation Manual

Powering On the AT-SBxPWRSYS1 AC Power Supply

Download from Www.Somanuals.com. All Manuals Search And Download.
The procedure in this section explains how to power on the AT-
SBxPWRSYS1 AC Power Supply. For installation instructions, refer to
"Installing the AT-SBxPWRSYS1 AC System Power Supply" on page 95.
Note
If the chassis has both AT-SBxPWRSYS1 and AT-SBxPWRPOE1
Power Supplies, you may power on the power supplies in any order.
The power supplies may also be powered on simultaneously.
To power on the chassis, perform the following procedure:
1. Identify AC sockets C and D in the recessed panel on the back panel
of the chassis, shown in Figure 108. The sockets are for the AT-
SBxPWRSYS1 System Power Supplies in slots C and D on the front
panel of the chassis.
C
D
Figure 108. AC Sockets on the AT-SBx3112 Chassis Rear Panel
2. Plug the AC power cord that comes with the power supply into a plug
whose corresponding slot on the front panel has a system power
supply.
SwitchBlade x3112 Installation Guide
A
B
155