HEIDENHAIN TNC 620 User Manual page 92

3
Displaying or editing text files
Use the internal text editor to open and edit text files (ASCII files,
e.g. with the extension txt). Proceed as follows:
Call the file manager: Press the PGM MGT key
Select the drive and the directory in which the
text file is saved
Move the cursor to the text file
Press the ENT key
The control opens the text file with the internal
text editor.
Alternatively, you can also open the ASCII files using
the Leafpad
familiar with from Windows, which you can use to edit
texts quickly (CTRL+C, CTRL+V,...), are available within
Leafpad.
With the key combination ALT+TAB, you can always
return to the control's user interface while leaving
the text file open. Alternatively, you can also click the
corresponding icon in the task bar to switch back to the
user interface of the control.
Proceed as follows to open Leafpad:
Use the mouse to select the Menu HEIDENHAIN icon from the
task bar
Select the Tools and Leafpad menu items in the pull-down
menu
Proceed as follows to exit Leafpad:
Use the mouse to select the File menu item
Select Exit
The control returns to the file manager.
92
additional tool. The shortcuts you are
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Fundamentals | File management