Display Unit And Operation - HEIDENHAIN TNC 620 User Manual

11

11.1 Display unit and operation

Touchscreen
Refer to your machine manual.
This function must be enabled and adapted by the
machine tool builder.
The touchscreen is distinguished by a black frame and the lack of
soft-key selection keys.
The TNC 620 has its operating panel integrated in the 19" screen.
Header
1
When the control is on, the screen displays the selected
operating modes in the header.
2 Soft-key row for the machine tool builder
3 Soft-key row
The control shows further functions in a soft-key row. The
active soft-key row is shown as a blue bar.
4 Integrated operating panel
432
Operating the Touchscreen | Display unit and operation
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
1
2
3
4