The Tnc 620; Heidenhain Klartext And Din/Iso; Compatibility - HEIDENHAIN TNC 620 User Manual

3
3.1

The TNC 620

HEIDENHAIN TNC controls are workshop-oriented contouring
controls that enable you to program conventional milling and
drilling operations right at the machine in easy-to-use Klartext
conversational language. They are designed for milling, drilling
and boring machines, as well as machining centers, with up to 6
axes. You can also change the angular position of the spindle under
program control.
Keyboard and screen layout are clearly arranged in such a way that
the functions are fast and easy to use.

HEIDENHAIN Klartext and DIN/ISO

HEIDENHAIN Klartext, the dialog-guided programming language
for workshops, is an especially easy method of writing programs.
Programming graphics illustrate the individual machining steps
for programming the contour. If no NC-dimensioned drawing
is available, then the FK free contour programming will help.
Workpiece machining can be graphically simulated either during a
test run or during a program run.
It is also possible to program in ISO format or DNC mode.
You can also enter and test one NC program while another
NC program is machining a workpiece.
Further information:
Programming or ISO Programming

Compatibility

NC programs created on HEIDENHAIN contouring controls (starting
from the TNC 150 B) may not always run on the TNC 620. If the
NC blocks contain invalid elements, the control will mark these as
ERROR blocks or with error messages when the file is opened.
Please also note the detailed description of the
differences between the iTNC 530 and the TNC 620.
Further information:
620 and the iTNC 530", Page 476
54
User's Manual for Conversational
"Differences between the TNC
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Fundamentals | The TNC 620