Positioning W/ Manual Data Input - HEIDENHAIN TNC 620 User Manual

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

Positioning w/ Manual Data Input

In order to skip NC blocks in the Positioning w/ Manual

Data Input operating mode, you need an alphabetic

In Positioning w/ Manual Data Input operating mode, you can

have the control skip NC blocks that have been marked corre-

Set the HIDE soft key to ON

The control skips the NC blocks.

Set the HIDE soft key to OFF

The control runs the NC blocks.

Proceed as follows to hide NC blocks in the Positioning w/

Manual Data Input operating mode:

Select the desired NC block

Press the / key on the alphabetic keyboard

The control inserts a slash (/).

Proceed as follows to show NC blocks again in the Positioning w/

Manual Data Input operating mode:

Select the hidden NC block

Press the Backspace key

The control removes the slash (/).

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018

Testing and running | Skipping NC blocks