HEIDENHAIN TNC 620 User Manual page 452
Setup, testing and running nc programs
Hide thumbs
Also See for TNC 620:
- User manual (616 pages) ,
- Operating instructions manual (64 pages) ,
- User manual (571 pages)
Table of Contents
Advertisement
12
Changing the display of the parameters
If you are in the configuration editor for the user parameters, you
can change the display of the existing parameters. In the default
setting, the parameters are displayed with short, explanatory texts.
Proceed as follows in order to have the actual system names of
the parameters be shown:
Press the Screen layout key
Press the SHOW SYSTEM NAME soft key
Follow the same procedure to return to the standard display.
Displaying help texts
The HELP key enables you to call a help text for each parameter
object or attribute.
If the help text does not fit on one page (1/2 is then displayed at
the upper right, for example), press the HELP PAGE soft key to
scroll to the second page.
The control displays other information (e.g. unit of measurement,
initial value, selection list) in addition to the help text. If the
selected machine parameter matches a parameter in the previous
control model, the corresponding MP number is displayed.
452
Tables and Overviews | Machine-specific user parameters
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Advertisement
Table of Contents
