HEIDENHAIN TNC 620 User Manual page 444

11
Symbol
Save elements and switch to the NC program
When you tap on the appropriate icons, the controls saves the
selected elements.
You can switch back to the Programming operating mode in the
following ways:
Press the Programming key
The control switches to the Programming mode of operation.
Close the CAD-Viewer
The control automatically switches to the Programming
operating mode.
Use the task bar to leave the CAD-Viewer open on the third
desktop
The third desktop stays active in the background
444
Gesture
Spread
Pinch
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Operating the Touchscreen | Gestures
Function
Magnify the graphic
Reduce the graphic