Changing The Heros Conversational Language - HEIDENHAIN TNC 620 User Manual

10
10.9 Changing the HEROS conversational
language
The HEROS conversational language is internally based on the NC
conversational language. Therefore, the HEROS menu and the
control cannot permanently be set to two different conversational
languages.
When you change the NC conversational language, the HEROS
conversational language is adapted to the NC conversational
language every time the control is restarted.
In order to change the HEROS conversational language,
the Allow NC to change HEROS config files function
must be activated in the SELinux menu.
Further information:
Page 373
The following link provides information on how to change the NC
conversational language:
Further information:
You can change the language layout of the keyboard for HEROS
applications.
The language layout for the control and the
HEIDENHAIN keyboard always remains in English,
even after the language has been changed. Changing
the language layout is therefore only reasonable for
additional keyboards.
Proceed as follows to change the language layout of the keyboard
for HEROS applications:
Select the HEROS menu icon
Select Settings
Select Language/Keyboards
The control opens the helocale window.
Select the Keyboards tab
Select the desired keyboard layout
Select Apply
Select OK
Press Apply
The changes are applied.
430
HEROS functions | Changing the HEROS conversational language
"SELinux security software",
"List of user parameter", Page 453
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018