Display Software Numbers - HEIDENHAIN TNC 620 User Manual

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

Display software numbers

The following software numbers are displayed on the control's

screen after the Software version MOD function has been

Control model: Designation of the control (managed by

NC SW: Number of the NC software (managed by

NCK: Number of the NC software (managed by

PLC: Number or name of the PLC software (managed by

your machine manufacturer)

In the FCL Information MOD function, the control shows the

following information:

Development level (FCL=Feature Content Level):

Development level of the software installed on the control

Further information:

functions)", Page 32

Entering the code number

The control requires a code number for the following functions:

Select user parameters

Configuring an Ethernet card

Enabling special functions for Q parameter

"Feature Content Level (upgrade

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018

MOD functions | Display software numbers