Control Model, Software And Features - HEIDENHAIN TNC 620 User Manual

1
1.2

Control model, software and features

This manual describes functions for setting up the machine as well
as for testing and running your NC programs. These functions are
provided by controls as of the following NC software numbers.
Control model
TNC 620
TNC 620 E
TNC 620 Programming Station
The suffix E indicates the export version of the control. The
following software options are unavailable or only available to a
limited extent in the export version:
Advanced Function Set 2 (option 9) limited to four-axis
interpolation
The machine manufacturer adapts the usable features of the
control to his machine by the setting machine parameters. Some of
the functions described in this manual may therefore not be among
the features provided by the control on your machine tool.
Control functions that may not be available on your machine
include:
Tool measurement with the TT
In order to find out about the actual features of your machine,
please contact the machine manufacturer.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the HEIDENHAIN controls. Participation
in one of these courses is recommended to familiarize yourself
thoroughly with the control's functions.
Cycle Programming User's Manual:
All of the cycle functions (touch probe cycles and fixed
cycles) are described in the
Manual. If you need this User's Manual, please contact
HEIDENHAIN.
ID: 1096886-xx
User's Manuals for Conversational Programming
and ISO Programming:
All information regarding NC programming (except
touch probe cycles and fixed cycles) is provided in the
Conversational Programming
User's Manuals. If you need these User's Manuals,
please contact HEIDENHAIN.
ID for Conversational Programming: 1096883-xx
ID for ISO Programming: 1096887-xx
28
Fundamentals | Control model, software and features
NC software number
817600-06
817601-06
817605-06
User's
Cycle Programming
and
ISO Programming
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018