Configuring The Hr 550Fs Radio Handwheel - HEIDENHAIN TNC 620 User Manual

9
9.11 Configuring the HR 550FS radio
handwheel
Application
This setup dialog is managed by the HEROS operating
system.
After you have changed the conversational language on
your control, you need to restart the control to enable
the new language.
To configure the HR 550FS radio handwheel, use the
SET UP WIRELESS HANDWHEEL soft key. The following functions
are available:
Assigning the handwheel to a specific handwheel holder
Setting the transmission channel
Analyzing the frequency spectrum for determining the optimum
transmission channel
Selecting transmitter power
Statistical information on the transmission quality
Any changes or modifications that were not expressly
approved by the party responsible for conformity could
void your authority to operate the device.
This device complies with Part 15 of the FCC Rules
and the RSS standard(s) of Industry Canada for license-
exempt equipment.
Operation is subject to the following conditions:
1 This device must not cause any harmful interference,
and
2 this device must accept any interference received,
including interference that may cause undesired
operation.
Assigning the handwheel to a specific handwheel
holder
Make sure that the handwheel holder is connected to the
control hardware.
Place the wireless handwheel you want to assign to the
handwheel holder in the handwheel holder
Press the MOD key to select the MOD function
Select the Machine settings menu
Select the configuration menu for the radio handwheel: Press
the SET UP WIRELESS HANDWHEEL soft key
Click on the Connect HW button
The control saves serial number of the inserted radio
handwheel and shows it in the configuration window on the
left next to the Connect HW button.
Save the configuration and close the configuration menu:
Press the END button
348
MOD functions | Configuring the HR 550FS radio handwheel
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018