HEIDENHAIN TNC 620 User Manual page 307

Pallets | Pallet management (option number 22)
Column Meaning
LOCATION
Location of the pallet
The entry MA indicates that there is a pallet or fixture
in the working space of the machine and can be
machined. Press the ENT key to enter MA. Press the
NO ENT key to remove the entry and thus suppress
machining.
LOCK Line locked
Using an * you can exclude the line of the pallet table
from processing. Press the ENT key to identify the
line with the entry *. Press the NO ENT key to cancel
the lock. You can lock the execution for individual NC
programs, fixtures or entire pallets. Unlocked lines
(e.g. PGM) in a locked pallet are also not executed.
PALPRES Number of the pallet preset
W-STATUS
Execution status
METHOD Machining method
CTID ID for mid-program startup
SP-X, SP-Y, Clearance height in the linear axes X, Y, and Z
SP-Z
SP-A, SP-B, Clearance height in the rotary axes A, B, and C
SP-C
SP-U, SP-V, Clearance height in the parallel axes U, V, and W
SP-W
DOC Comment
You can remove the LOCATION column if you are only
using pallet tables in which the control is to machine all
lines.
Further information:
Page 309
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
"Inserting or deleting columns",
Field type
Optional field
If the column exists, the entry is
mandatory.
Optional field
Optional field
This entry is only required if pallet
presets are used.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
This entry is only required for tool-
oriented machining.
Optional field
Optional field
Optional field
Optional field
8
307