Control Panel; Screen Keypad - HEIDENHAIN TNC 620 User Manual

Fundamentals | Visual display unit and operating panel

Control panel

The TNC 620 is delivered with an integrated operating panel. As
an alternative, the TNC 620 is also available with a separate display
unit and an operating panel with an alphabetic keyboard.
Alphabetic keyboard for entering texts and file names, as well
1
as for ISO programming
2 File management
Calculator
MOD function
HELP function
Show error messages
Toggle between the operating modes
3 Programming modes
4 Machine operating modes
Initiating programming dialogs
5
6 Navigation keys and GOTO jump command
7 Numerical input and axis selection
8 Touchpad
Mouse buttons
9
10 Machine operating panel
More information Machine manual
The functions of the individual keys are described on the inside
front cover.
If you are using a TNC 620 with touch control, you can
replace some keystrokes with hand-to-screen contact.
Further information:
Page 431
Refer to your machine manual.
Some machine tool builders do not use the standard
HEIDENHAIN operating panel.
External keys, e.g. NC START or NC STOP, are described
in your machine manual.

Screen keypad

If you are using the compact version of the control (without
alphabetic keyboard), you can enter letters and special characters
with the screen keypad or with an alphabetic keyboard connected
to the USB port.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
"Operating the Touchscreen",
2
5
4 3
6
1
2
5
4 3
3
7
7
6
8
9
10
59