Activating Manual Tilting - HEIDENHAIN TNC 620 User Manual

5

Activating manual tilting:

Press the 3-D ROT soft key
The control opens the Tilt the working plane
pop-up window.
Use the arrow keys to position the cursor on the
desired function
Press the ACTIVE soft key
If required, use the arrow keys to position the
cursor on the desired rotary axis
If required, enter the tilting angle
Press the END key
The input is complete.
If you set the Manual Operation 3-D ROT function
to Active, the values defined in SPA, SPB, and SPC
become effective. These values are ignored by the other
functions.
Manual Operation Tool Axis
Refer to your machine manual.
Your machine manufacturer enables this function.
If the Traverse in Tool Axis function is active, the control displays
the icon in the status display.
You can only move in the direction of the tool axis. The control
locks all other axes.
The traverse is effective in the T-CS tool coordinate system.
Further information:
Manual Operation 3-D ROT
If the 3-D ROT function is active, the control displays the
the status display.
All axes move in a tilted working plane.
If a basic rotation or 3-D basic rotation has additionally been saved
to the preset table, it will automatically be taken into account.
The axis movements are effective in the WPL-CS working plane
coordinate system.
Further information:
Page 114
228
Manual Operation Tool Axis
Manual Operation 3-D ROT
Manual Operation Basic Rotation
"Tool coordinate system T-CS", Page 116
"Working plane coordinate system WPL-CS",
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Setup | Tilting the working plane (option 8)
icon in