Data Transfer And Communication - HEIDENHAIN MANUALplus 620 Manual

Data transfer and communication

Data interfaces
Overview The MANUALplus 620 is connected to PCs, networks and other
data storage devices via data interfaces.
Ethernet The MANUALplus 620 can be interconnected via the Ethernet
interface. For connection to the data net, the control features a
1000BASE-T (twisted pair Ethernet) connection.
Maximum transmission distance:
Unshielded 100 m
Shielded 400 m
Protocol The MANUALplus 620 communicates using the TCP/IP protocol.
•
Network NFS file server
•
connection Windows networks (SMB)
Data transfer speed Approx. 400 to 800 Mbps (depending on file type and network
utilization)
RS-232-C/V24 Data interface according to DIN 66 020 or EIA standard RS-232-C.
Maximum transmission distance: 20 m
Data transfer rate 115 200; 57 600; 38 400; 19 200; 9600; 4800; 2400; 1200; 600;
300; 150; 110 bps
Protocols The MANUALplus 620 can transfer data using various protocols.
Standard data The data is transferred character by character. The number of data
transfer bits, stop bits, the handshake and character parity must be set by
the user.
Blockwise data The data is transferred blockwise. For data backup, a so-called
transfer block check character (BCC) is used. This method improves data
security.
LSV2 Bidirectional transfer of commands and data as per DIN 66 019.
The data is divided into telegrams (blocks) and transmitted.
Adapter block For connecting the interface to the electrical cabinet or operating
panel.
RS-232-C adapter
USB The MANUALplus 620 The TNC 640 features USB ports for the
connection of standard USB devices, such as a mouse, drives, etc.
On the back panel of the MC 7xxx there are 4 USB 3.0 ports. One
easily accessible USB 2.0 port is on the front of the unit. A cover
cap protects it from contamination. The USB ports are rated for a
maximum of 0.5 A.
USB cables Cable length up to 5 m
Cable length 6 m to 30 m with integrated
amplifier; USB 1.1.
9-pin ID 363987-xx
25-pin ID 310085-xx
ID 354770-xx
ID 624775-xx
61